alpine’s i personalize website

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=107970
Printed Date: May 02, 2024 at 5:21 AM

Topic: alpine’s i personalize website

Posted By: mennitti
Subject: alpine’s i personalize website
Date Posted: October 06, 2008 at 9:00 PM

I wanted to try out the i-personalize section of the website for parametric eq and time alignment. My question is: I have the D310 and the H701 processor running 4 amps, is there anyway to use the website to calculate my setup?

Thanks.

Replies:

Posted By: i am an idiot
Date Posted: October 06, 2008 at 9:14 PM

The d310 is on the list of compatible units.

https://i-personalize.alpine.com/nam/ippop/help/hu.html

Try it and let us know.

https://i-personalize.alpine.com/nam/index.html#

Posted By: mennitti
Date Posted: October 07, 2008 at 5:03 AM

Yeah, but the H701 is not, and neither is a 4 way speaker system.

Posted By: i am an idiot
Date Posted: October 07, 2008 at 6:45 AM

OK don't try it.

Posted By: mennitti
Date Posted: October 07, 2008 at 3:04 PM

I did try it... thus my questions.

Posted By: i am an idiot
Date Posted: October 07, 2008 at 3:46 PM

The white switch on the bottom of the deck, is it set to norm or eq?

Posted By: mennitti
Date Posted: October 07, 2008 at 4:05 PM

I'm not sure. What does it do? I don't remember reading about it in the owners manual.

Posted By: i am an idiot
Date Posted: October 07, 2008 at 5:49 PM

If it is set to EQ, it sends signal to the processor and then back into the deck. Then you should be able to use the I-Personalize function.

Posted By: mennitti
Date Posted: October 08, 2008 at 4:59 AM

The deck works fine. My question is about using the website.

Print Page | Close Window