Print Page | Close Window

JVC-SH707 in 03 Ford F-150

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=10836
Printed Date: July 26, 2025 at 7:18 PM


Topic: JVC-SH707 in 03 Ford F-150

Posted By: bkgwatfiv
Subject: JVC-SH707 in 03 Ford F-150
Date Posted: March 13, 2003 at 8:51 AM

I am completely new to this, but thought the job would be easy.  I purchased install kit and harness.  The ford harness has 2 extra wires that do not appear on the harness that came with jvc.  One (orange with black stripe) is labeled “dimmer ground.”  The other one, (black with white stripe) is labeled amplifier ground.  Can you give me any guidance as to what should be done with these?  Should they be attached to vehicle metal or just taped off?  Thanks.



Replies:

Posted By: bberman1
Date Posted: March 13, 2003 at 9:39 AM

Ground them to a clean metal surface on the chassis behind the dash





Posted By: 1nicemustang
Date Posted: March 13, 2003 at 12:11 PM
here https://www.the12volt.com/installbay/forum_posts.asp?tid=10808&PN=1 that thread will show you and also to another page to discuss the useage of the two wires you specified




Posted By: bberman1
Date Posted: March 13, 2003 at 3:02 PM
1nicemustang that post and bkgwatfiv post are two different questions and answers





Print Page | Close Window