line out converter
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=108567
Printed Date: October 31, 2025 at 10:37 AM
Topic: line out converter
Posted By: soultinter
Subject: line out converter
Date Posted: October 31, 2008 at 2:16 PM
can anyone suggest a VERY HIGH QUALITY, line out that can handle the power of a (bose) factory subwoofer. Preferably something simple. Ideally not something high end like an LC6 or cleansweep. This specific question is in regard to an '09 cadillac CTS, just adding an amp/sub.
Replies:
Posted By: ckeeler
Date Posted: October 31, 2008 at 2:29 PM
i do know that a PIE PL2 is fairly heavy duty. im sure there are others as well.
Posted By: i am an idiot
Date Posted: October 31, 2008 at 6:30 PM
Most Bose sub amps do not put out tons of voltage. They usually use 1 Ohm or 2 Ohm drivers. This will allow a decent amount of power with out a lot of voltage. Pac-audio.com PAC makes a line out converter for higher power systems. It is known as an SNi-35. It will definitely handle the power of the system.
Posted By: DYohn
Date Posted: October 31, 2008 at 7:29 PM
Scosche also makes a nice series rated at 80 watts. ------------- Support the12volt.com
|