6 ohm speaker

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=108678
Printed Date: May 12, 2025 at 3:17 PM

Topic: 6 ohm speaker

Posted By: whchua
Subject: 6 ohm speaker
Date Posted: November 04, 2008 at 8:13 PM

I had a pair focal 6WM which is 6ohm, what will happen if i use Audison LrX 2.500 to power it?

Replies:

Posted By: i am an idiot
Date Posted: November 04, 2008 at 8:40 PM

To power It or them?

Posted By: whchua
Date Posted: November 05, 2008 at 4:37 PM

Power both speaker

Posted By: i am an idiot
Date Posted: November 05, 2008 at 7:59 PM

If it is a 2 channel amp and you connect one speaker to each channel, you will be fine. If it is a 2 channel amp that is 2 ohm stereo or 4 ohm mono stable, and you bridge the amp with the speakers wired in series, you will be fine. If you parallel the woofers and bridge the amp, it will be a 3 ohm load. Possibly not so fine.

Posted By: whchua
Date Posted: November 06, 2008 at 5:02 PM

Thank you !!

Print Page | Close Window