how to bypass factory amp 97 concorde

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=109001
Printed Date: May 10, 2025 at 6:41 PM

Topic: how to bypass factory amp 97 concorde

Posted By: keri
Subject: how to bypass factory amp 97 concorde
Date Posted: November 17, 2008 at 8:02 PM

Bought a new head unit and 6x9s and realized that it had a factory amp and i done talked to everybody under the sun and no one wants to give my a straight answer! How do i go about bypassing the factory amp? 97' chrysler concorde

-------------
Keri Geiger

Replies:

Posted By: thephenixvampir
Date Posted: December 02, 2008 at 6:15 PM

if you still need help...let me know. i just replaced all the speakers in my 97 concord. the 3 1\2, the 5 1\4, and the 6x9's (those were a pain in the rear). rewired the whole thing ( new speaker wire, power, and line level RCA's) -- your best bet is to run new rca cables from your new HU to an amp and run that for your rears....unless you just want to replace everything.

Posted By: kureti
Date Posted: December 03, 2008 at 2:54 AM

its possible to bypass the factory amplifer, I dont know how to do the same But can refer you to a company Pacific Accessory Corporation phone: 1.800.854.3133 their web site address is www.pac-audio.com they have a ready solution for your problem. If i am sure the model number is OEM-2 Multi purpose premium Sound system interface or AOEM - Premium Sound System Amplifier Interface. Check with the compnay for more details... :-)

-------------
K. Venugopal Rao

Print Page | Close Window