hifonics bxi 1606d amplifer schematics

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=109104
Printed Date: May 13, 2025 at 5:11 AM

Topic: hifonics bxi 1606d amplifer schematics

Posted By: dbldragon
Subject: hifonics bxi 1606d amplifer schematics
Date Posted: November 20, 2008 at 11:50 PM

I have a Hifonics bxi 1606d amplifer and a few months ago it went out on me, I can't see where anu of the resistors are burnt out nor see any other damaged ares. So I was wonder if anyone could help me find the schematics for the amp so I can cross-refference everything on the amp to make sure it's properly running.

Thank you so much.

)))WOLVERINE(((

-------------
)))WOLVERINE(((

Replies:

Posted By: i am an idiot
Date Posted: November 21, 2008 at 8:17 PM

Define "went out". Does it mean the amp does not come on, does it come on temporarily and then blows the fuse, does the protection light stay on?

Posted By: paidnfull
Date Posted: November 24, 2008 at 2:39 PM

I've had this same amp and I have a similar issue you might be able to help me with. My younger sibbling removed the sub box out of the vehicle and left the speaker wires hanging. He drove it like that and I'm assuming the speaker wires made contact with each other while driving. I removed the amp and installed it in a 2003 chevy tahoe. As soon as the amp powered it would pop the fuse on the 4 ga. power wire at the battery. What could cause this ? Same model amp as listed above.

dbldragon if you feel I hijacked your thread I apologize I just didn't think its necassary to make another topic

Posted By: dbldragon
Date Posted: November 24, 2008 at 3:09 PM

I do believe if memory serves me. The amp does turn on and is ready to go but nothing comes out no sound or anything.

-------------
)))WOLVERINE(((