Tweeter Setting 0db, -3db, -6db, Which?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=110072
Printed Date: May 12, 2025 at 12:00 PM

Topic: Tweeter Setting 0db, -3db, -6db, Which?

Posted By: built b16a
Subject: Tweeter Setting 0db, -3db, -6db, Which?
Date Posted: December 27, 2008 at 5:46 AM

im new to component speakers and using crossovers..

can anyone explain the difference in the tweeter ports. i assume they adjust the amount of bass into the tweeter, but unsure as which one to use.

Replies:

Posted By: ragsports
Date Posted: December 27, 2008 at 9:16 AM

No not the ammount of bass. This changes how loud the tweters are. 0db is flat -3 db is -3 decibels and -6 is -6 decibels. Install them and start at the zero setting. If the highs seem to loud for your tastes go down to the -3 db setting, if you are still dont like how they sound try the -6 db setting. It is really about personal preference. just pick the setting you like the most.

Posted By: built b16a
Date Posted: December 27, 2008 at 2:18 PM

ok cool. i just wasn't sure, haven't messed with Xovers before, as this is my 1st component install in my car.

Print Page | Close Window