touch screen/bluetooth configuration

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=110101
Printed Date: May 16, 2024 at 7:03 PM

Topic: touch screen/bluetooth configuration

Posted By: mci_sniper
Subject: touch screen/bluetooth configuration
Date Posted: December 27, 2008 at 10:50 PM

I just installed a Pioneer avic-f700bt and I am having problems being able to configure my phone to it. My phone cannot find it with Bluetooth. Also all the options on the screen dealing with the phone are "grayed out" and I cannot even press them to try and configure the settings.

My thoughts: Maybe some safetys on it so options cannot be configured while driving?

Thanks for time and help in advance.

-------------
Semper Fi

Replies:

Posted By: nj-installer
Date Posted: December 27, 2008 at 11:48 PM

Well is there a parking brake wire for that unit? If so is it hooked up properly and the parking brake engaged? It does sound like it is defeated or not enabled. Did you go to the trouble shooting section of the manual?

Posted By: mci_sniper
Date Posted: December 28, 2008 at 1:01 PM

Thanks for the reply. I actually moved the mute wire up one spot and then over a couple and then grounded it with the parking break wire, which acted as a bypass.

-------------
Semper Fi

Posted By: memfus_boi
Date Posted: December 31, 2008 at 11:43 AM

also make sure u have the update for your bt, it you will notice a difference

-------------
If I'm to loud, then you're too old!!!

Print Page | Close Window