alpine in an 01 concorde
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=110506
Printed Date: May 15, 2025 at 10:15 AM
Topic: alpine in an 01 concorde
Posted By: ntfday
Subject: alpine in an 01 concorde
Date Posted: January 09, 2009 at 11:15 PM
I'm trying to install an Alpine CDA 9856 in a 2001 Chrysler Concorde and can someone tell me where the single purple / YELLOW wire that plugs into the stock radio is used with the Alpine?
-------------
Not Fade Away
The easiest road is usually the last one sought
Replies:
Posted By: donvito08
Date Posted: January 17, 2009 at 12:38 AM
my best guess would be the factory ground strap
-------------
MOBILE SECURITY SPECIALIST
MECP CERTIFIED INSTALLER
SELF CERTIFIED SMARTASS
Posted By: i am an idiot
Date Posted: January 17, 2009 at 2:48 AM
I see no wire of that color listed in the info from Audiovox's website.
Battery PINK (+) RADIO HARNESS
Accesory RED / WHITE (+) RADIO HARNESS
Ground STRAP
Dimmer ORANGE (+) RADIO HARNESS
Power Antenna ORANGE / RED (+) RADIO HARNESS
Amp Turn On GREEN/ RED
LF Speaker (+) DARK GREEN
LF Speaker (-) BROWN / RED
RF Speaker (+) VIOLET
RF Speaker (-) DARK BLUE/RED
LR Speaker (+) BROWN / YELLOW
LR Speaker (-) BROWN / LIGHT BLUE
RR Speaker (+) DARK BLUE/WHITE
RR Speaker (-) DARK BLUE/ORANGE
Posted By: ntfday
Date Posted: January 17, 2009 at 9:34 PM
Sorry, the single wire is PURPLE / white and after a lot of research, mostly on this site, it's some sort of data link. So, I'm going to by-pass the amp and put in new speakers.
Thank you for your replies.
-------------
Not Fade Away
The easiest road is usually the last one sought
Posted By: i am an idiot
Date Posted: January 17, 2009 at 10:09 PM
If you power up the amp turn on wire, there is no need to bypass the amplifier. The wire is listed in the info I posted.
|