lineout converter

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=110589
Printed Date: June 01, 2024 at 6:28 PM

Topic: lineout converter

Posted By: tonelogan
Subject: lineout converter
Date Posted: January 12, 2009 at 12:25 PM

hey i have a 09 jeep wrangler comes with stock sub/amp but i added my own with a lineout converter everything works, but the sub is hardly getting any power at all and it seems like no matter the volume 10-30 the power of the sub stays the same, i have the gain on my amp all the way up because the less i make it the weaker the sub gets and my frequency is set at about 80

Replies:

Posted By: DYohn
Date Posted: January 12, 2009 at 1:11 PM

Where did you connect the LOC?

-------------
Support the12volt.com

Posted By: tonelogan
Date Posted: January 12, 2009 at 1:19 PM

i connected it to the back of the headunit where all the wires come in to the harness... there were 4 wires on the LOC so i connected them to the 4 corresponding wires going to the HU

Posted By: DYohn
Date Posted: January 12, 2009 at 2:01 PM

tonelogan wrote:

i connected it to the back of the headunit where all the wires come in to the harness... there were 4 wires on the LOC so i connected them to the 4 corresponding wires going to the HU

Try connecting it to the OEM subwoofer - to the speaker.

-------------
Support the12volt.com

Print Page | Close Window