Print Page | Close Window

What do I need to test Amplifier Output

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=11124
Printed Date: September 12, 2025 at 8:53 PM


Topic: What do I need to test Amplifier Output

Posted By: dcwinc
Subject: What do I need to test Amplifier Output
Date Posted: March 19, 2003 at 10:54 AM

I receive amplifers (like Rockford Fosgate) that come with a certification sheet saying what the RMS is at 2 ohms.  What type of equipment do I need to test an amplifier's watt output?  What do they use for a load?  Do they hook up a 2 ohm speaker for a load?  We get a lot of used and refurb amps and sometimes one channel will be louder than another and I was looking for a way to accuarately test amplifier output.  Also do they use a particular signal input and signal generator for a constant input level?  Please excuse my ignorance but I'm learning as fast as I can.  I am now interested in the science more than the trial and error of human ears.

Thanks,

Bob

Warehouse full of car audio



-------------
If you can't bump it: dump it



Replies:

Posted By: esmith69
Date Posted: March 19, 2003 at 11:22 AM

https://www.eatel.net/~amptech/elecdisc/measpwr.htm




Posted By: dcwinc
Date Posted: March 19, 2003 at 11:54 AM

Thank you so much for this information.



-------------
If you can't bump it: dump it


Print Page | Close Window