2 alpine 10'' type x, amp, wiring
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=111298
Printed Date: May 15, 2024 at 3:12 AM
Topic: 2 alpine 10'' type x, amp, wiring
Posted By: lobster
Subject: 2 alpine 10'' type x, amp, wiring
Date Posted: February 03, 2009 at 10:00 PM
i have 2 alpine 10" type x.. they use 1000 rms. if i get an amp that can do 1000 rms 1 ohm, and i parallel wire them to one ohm will they each get 1000 rms or do they split it into 500 each...? if so then do i need an amp that puts out 2000 rms for 1 ohm??
Replies:
Posted By: dawggboy
Date Posted: February 03, 2009 at 10:06 PM
yeah you need 2000 watts@ 1 ohm to get 1000 per sub
Posted By: jmelton86
Date Posted: February 04, 2009 at 4:29 AM
They will each get 500watts. The amp is only capable of making 1000watts, not 2 x 1000watts (= 2000watts).
------------- 2013 Kia Rio -90a alternator
DDX470HD GTO14001 GTO1014D (x3)
Big3 in 1/0G
1/0G to GTO14001
Posted By: i am an idiot
Date Posted: February 04, 2009 at 5:46 AM
If you have a truck with a 4,000 pound towing capacity, if you mount 2 extra balls on the bumper, can you now tow 12,000 pounds?
Posted By: lobster
Date Posted: February 04, 2009 at 3:43 PM
ok thats what i thought but someone told me that i need an amp and told me to parallel wire them and i looked at the amp and it was 1000 wats at 1 ohm and i didnt know if thats just how it worked or if he was just on crack....
Posted By: lobster
Date Posted: February 04, 2009 at 10:20 PM
so i have two alpine type x 4 ohm subs(swx-1042d) and im wondering if this amp (Soundstream TRX2000D) will work for them if i parallel wire them to one ohm. will it put out the power i need, and if its in general a good amp?
Posted By: i am an idiot
Date Posted: February 04, 2009 at 10:25 PM
If the speakers are Dual Voice Coil drivers with 4 oh coils, then yes you can. If the speakers are as you say 4 ohm single voice coil, then no it will not make it to 1 ohm with 2 4 ohm coils.
|