Print Page | Close Window

fastening wires to sheet metal

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=111374
Printed Date: May 19, 2025 at 8:29 AM


Topic: fastening wires to sheet metal

Posted By: asc1963
Subject: fastening wires to sheet metal
Date Posted: February 07, 2009 at 11:50 AM

Has anyone ever used this kind of wire fastener to fasten wires to sheet metal, like in the trunk or under the IP? I was wondering if they work.


-------------
ASC



Replies:

Posted By: KPierson
Date Posted: February 07, 2009 at 4:08 PM

I've used the wire tie sticky things - little square bases that accept a wire tie.

I really like them, and they are reusable.  You just need to make sure you prep the surface correctly - just like with any sticky type solution.



-------------
Kevin Pierson



Posted By: asc1963
Date Posted: February 07, 2009 at 5:13 PM
Yea, I've used them before. The reason I kinda thought these would work is I'm using them behind a panel that sits real close to the metal, there's hardly any clearance. it's either the wire straps or duct tape.

-------------
ASC



Posted By: asc1963
Date Posted: February 19, 2009 at 8:23 PM
update ... I ordered the wirestraps and they work great. super sticky adhesive and a real neat look. check them out here.

-------------
ASC



Posted By: ragsports
Date Posted: February 21, 2009 at 11:15 AM
what model of the straps did you get?



Posted By: asc1963
Date Posted: February 21, 2009 at 4:18 PM
The Professional version ... they claim they are used by the OEM's

-------------
ASC


Print Page | Close Window