wiring amp to factory components?
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=112018
Printed Date: April 26, 2024 at 6:30 PM
Topic: wiring amp to factory components?
Posted By: danz3
Subject: wiring amp to factory components?
Date Posted: March 01, 2009 at 3:55 PM
I have a 2 channel MB Quart PAB 2100 amp that I am installing in my car. My car has a stock component system in the doors. the current system consists of a bass, mid, and tweeter in each door. How can I connect my amp to run this on the OEM BMW reciever? I have little experience in audio so simple is better.
Replies:
Posted By: tcss
Date Posted: March 01, 2009 at 5:27 PM
Year and model BMW?
------------- There is no such thing as free installation!
Posted By: danz3
Date Posted: March 02, 2009 at 6:18 AM
1996 Z3 non HK system
Posted By: haemphyst
Date Posted: March 02, 2009 at 7:41 AM
If I am not mistaken, that was an all active system, with a 6 channel amplifier in the trunk. This will NOT be an easy retrofit, as you will have to build a three-way passive crossover system for both doors. (I believe I actually have an amp from one, sitting in my garage... :P )
If I am wrong, I'll get called on it for sure, but I think I remember that one correctly.
BTW? How you been, Bob?
------------- It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."
Posted By: danz3
Date Posted: March 02, 2009 at 10:03 AM
I am not looking for concert hall sound just something better than the OEM. My options are connect the speakers to achieve between 2-4 ohm so I can use my amp and include a 2-way crossover or buy a 3-way and connect each speaker. Thoughts?
|