need info, orion xtreme xtr 100 amplifier
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=112275
Printed Date: May 12, 2025 at 1:55 PM
Topic: need info, orion xtreme xtr 100 amplifier
Posted By: relfecting
Subject: need info, orion xtreme xtr 100 amplifier
Date Posted: March 11, 2009 at 2:31 PM
I have an Orion Xtreme XTR 100 sitting here. I have done a ton of research and the most I could find is that it "may" be the same as the NT 100 meaning its a 1000w x1 @ 1 ohm. Any info would be help full.
Also I'm looking for a balanced input converter and the speaker wire tail plug. If any one could point me in a direction to locate something I would be greatful.
Replies:
Posted By: lspker
Date Posted: March 11, 2009 at 9:35 PM
Orion XTR were 4 ohm stable in mono, 2 ohm in stereo. The NT was a "special"
Posted By: audiocableguy
Date Posted: March 12, 2009 at 2:49 PM
Are you looking for the 5pin DIN input or the Tm-3 small balanced connectors?
Posted By: relfecting
Date Posted: March 13, 2009 at 11:21 AM
I'm looking for anything that will allow RCA input to be converted for this amp. So a din converter or a mini xlr line driver from orion..
Also I did a ton of digging around and found that these are the exact same amps as the NT series. I was also told by our Orion rep in this area that the XTR was produced first. Then they changed to the NT but nothing other then color was changed. I'm looking for internal pics now to confirm. I seen the xtr 200 and NT 200 and they have difference what so ever.
Posted By: audiocableguy
Date Posted: March 13, 2009 at 12:42 PM
You can use any PPI, Special Edition or Orion RCA to Din. They are both wired the same. Unbalanced. You can make your own easily. The speaker connector should be the standard Orion 9 pin Molex.
|