crossover

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=112326
Printed Date: November 04, 2025 at 2:13 AM

Topic: crossover

Posted By: dred
Subject: crossover
Date Posted: March 13, 2009 at 3:24 PM

hey guy i want to buy a crossover for my sound system its the Clif Designs CDQ3X i want to put 2 pioneers TS-s20 on the front channel of the crossover high pass on my amp. I was wondering what does the frequency multiplier DO 1x-20x does?? helpp

-------------
dre

Replies:

Posted By: DYohn
Date Posted: March 13, 2009 at 7:40 PM

It's a multiplication factor for the setting of that control. So, if the dial says, say, "100" at 1X that's 100Hz, and at 20X that's 2000Hz.

I assume you are setting up a powered component set? What's the speakers and what's your target XO frequency for the tweeter?

-------------
Support the12volt.com

Posted By: dred
Date Posted: March 14, 2009 at 5:40 AM

i am going to put the tweeters on the front high pass channel which the frequency multiplier they are pioneer TS-S20's

-------------
dre

Print Page | Close Window