wiring amp and/or sub?
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=112598
Printed Date: May 10, 2025 at 12:36 PM
Topic: wiring amp and/or sub?
Posted By: bigboijohnny
Subject: wiring amp and/or sub?
Date Posted: March 23, 2009 at 5:21 PM
Hi, i have been having trouble on what i should do with how i should be wiring my subs. My amp is Hifonics
BXI 1610D which the bad part about this it has 2x + and - instead of just having one + and - and 2x Rockford
Fosgate P3SD212 shallow mounts dual voice coil which are at 2ohms. how i want to run it is that they are
2ohms per sub since its a 2ohm sub and the amp can handle 2 ohm stable. what im trying to figure out is how
can i run the subs? theres a method of running dual 2ohm sub to a 2ohm load but theres also a method in the
hifonics book running one into a +- and the other into +- but i dont know which is the right way. any advice
would sure help me a whole lot. Thankyou.
Replies:
Posted By: big v
Date Posted: March 23, 2009 at 6:43 PM
i would just run my subs in series - to + from one sub to the other then -and + on the amp
-------------
12345
Posted By: bigboijohnny
Date Posted: March 23, 2009 at 6:49 PM
So pretty much the same as the diagram on this website? for 2 2ohms to a 2ohm load?
|