ho alts

Does anyone have a link or know of anyone that can make brackets for multiple alts? i have looked at excessive amp and power mustards they both make ho alts for my application buy i want to run multiples. 96 jimmy 4.3 v6 6 12s 5500 watts soon to be torn out and will be replaced by 2 DD 9518F and 2 pa 5500w 3000 rms amps any advice?

-------------
Blazerspl
6 rockford 12s
5500 watt pa amp
12.0 cubic enclosure
BIG 3

Yes, DO NOT go with thoes PA amps. You are going to be very disappointed in the long run. They produce no where near the power they claim, and the build quality on thoes amps are horrible. Save up your money and put it towards a good quality amplifier. Maybe we can make some different suggestions. What is your budget? As for the brackets most of the time theses have to be custom made for the vehicle. There are only a handful of vehicles they make pre-manufactured brackets of that type for.

You want to run multiple alternators?  You'll most likely have to get a custom bracket fabricated for you.  Go talk to a good auto electrical shop in your area and see if they have a welder who can help.  Or call these guys.

And ditto on the PA amplifiers.

-------------
Support the12volt.com

im just like the other guy with the pa amp but mine hasnt crapped out yet..... Yet that is. it was a good deal for the power i thought?  Im going to running the DD9518f two of them im sick of the light weight stuff I want tons of bass and tons of SPL ive been stuck at 145 db and it sucks. so what kinda amps put out true power without paying a dollar per watt?

-------------
Blazerspl
6 rockford 12s
5500 watt pa amp
12.0 cubic enclosure
BIG 3

DLS amps are nice.  US Amps has lots of fans and seem pretty good still, although they're not as good as they used to be.  I always liked JBL amplifiers.  Some of the Memphis stuff is still pretty good too, and some people like Cadence.  JL Audio amps are very nice, then there's Zapco and Audisson and Genesis and Brax/Helix but those may be out of your price range.

-------------
Support the12volt.com

yea like i said i really dont want to pay a dollar per watt but i gotta do what i gotta do. so should i just google the brand name you stated above? and then look for a authorized dealer vs the flea market LOL just kidding

-------------
Blazerspl
6 rockford 12s
5500 watt pa amp
12.0 cubic enclosure
BIG 3

im looking at this a6000gti jbl amp its not really clear about the price but it seems to supply the power and you guys seem to like it alot more than pa and kole so what do you think? im gonna go work on my truck be back in a little

-------------
Blazerspl
6 rockford 12s
5500 watt pa amp
12.0 cubic enclosure
BIG 3

Thoes are usually around 2 grand, great amps but still pricey, What type of voice coils are on that sub? Ohm ratings and how many coils.

im checking out amps on the web i found a 10,000 watt warhorse for a dollar per watt id love to have but i think she will say no so im gonna keep looking

-------------
Blazerspl
6 rockford 12s
5500 watt pa amp
12.0 cubic enclosure
BIG 3

What's so magic about "a dollar a watt"?

-------------
Support the12volt.com

Again, what coils are on that subwoofer? maybe we can make some suggestions, also what is your budget?

ok nothing is magic about the dollar per watt just an expression cuz there kinda pricy. Um maybe 500 to 700 dollars is the price range im looking for. The subs are either dual 2 or dual 4 spl or sql. also i listen daily loud daily. and ive just started on THE BIG 3 what should i be seeing with the volt meter or do i need to be using a ammeter on what wire?

-------------
Blazerspl
6 rockford 12s
5500 watt pa amp
12.0 cubic enclosure
BIG 3

also thanks alot fellas for helping

-------------
Blazerspl
6 rockford 12s
5500 watt pa amp
12.0 cubic enclosure
BIG 3

The Big 3: https://www.the12volt.com/installbay/forum_posts.asp~TID~73496~PN~1  You should be using an ohm meter.

For 500-700 bucks I'd probably buy this subwoofer amp:  JL Slash V2

-------------
Support the12volt.com

that link isnt going anywhere do you have the model # on the jl website

-------------
Blazerspl
6 rockford 12s
5500 watt pa amp
12.0 cubic enclosure
BIG 3

Fixed.  Thanks.

-------------
Support the12volt.com

i think im doing somthing wrong im clicking on it and then it pulls this( page cannot be displayed) bs refresh?

-------------
Blazerspl
6 rockford 12s
5500 watt pa amp
12.0 cubic enclosure
BIG 3

hey i have a question : what does the status stars mean? im just asking im happy i have one now

-------------
Blazerspl
6 rockford 12s
5500 watt pa amp
12.0 cubic enclosure
BIG 3

You get your first star after 50 posts. Look into the JBL GTO24001 (around 700 dollars) 2400 RMS at 2 ohms. Get the dual 2 ohm version subwoofers so they can be wired into a 2 ohm total load.

are the jl amps stable down to one ohm or do i even need to worry? what is the peak wattage ? and how will it affect daily sq going with the 2 dvc vs 4 dvc? or will it

-------------
Blazerspl
6 rockford 12s
5500 watt pa amp
12.0 cubic enclosure
BIG 3

the biggest i found on the website is th 10002v1 and its 1100 bucks

-------------
Blazerspl
6 rockford 12s
5500 watt pa amp
12.0 cubic enclosure
BIG 3

Check out DCpowerinc for your bracket. They seem to be able to make brackets for anything, and do good work.... I haven't used one personally but i've seen nothing but happy people with them.

Coils will not affect sq. They make them in different ohm ratings simply for different wiring options. Did you check out the amp i suggested?

had to go to the post office im looking now

-------------
Blazerspl
6 rockford 12s
5500 watt pa amp
12.0 cubic enclosure
BIG 3

i think those will do, but i will need two i do belive. cuz the dds hold a million watts rms

-------------
Blazerspl
6 rockford 12s
5500 watt pa amp
12.0 cubic enclosure
BIG 3

if you want to run 2 then get your subwoofers in the dual 4 ohm versions and run them in parallel to create a 2 ohm load for each amp.