Print Page | Close Window

wiring 2 hx2 12"s, dual 2 and dual 4 ohm

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=113166
Printed Date: July 19, 2025 at 4:12 AM


Topic: wiring 2 hx2 12"s, dual 2 and dual 4 ohm

Posted By: blackangel420
Subject: wiring 2 hx2 12"s, dual 2 and dual 4 ohm
Date Posted: April 15, 2009 at 1:27 AM

aight i have 2 hx2 12"s one is a d2 ohm and the other is a d4. when i got them they were all wired up and sounded great but i have since got other audio and what not and set those aside. now i want to put them in my s10 and i dont remeber how they were wired up. can anyone help me?

-------------
BlackAngel420



Replies:

Posted By: i am an idiot
Date Posted: April 15, 2009 at 2:22 AM
It would help if we knew what kind of amp you were trying to connect them to.




Posted By: blackangel420
Date Posted: April 15, 2009 at 1:30 PM

i havnt got the amp back yet its in the shop being repaired its a kicker 850.2... how many differnt ways i can wire them up



-------------
BlackAngel420




Posted By: i am an idiot
Date Posted: April 15, 2009 at 6:28 PM
If it were me, and you insisted on using both woofers,  I would wire the dual 4 in parallel and connect it to one channel of the amp.  I would use only one coil of the 2 ohm driver, and wire it to the other channel of the amp.  Each channel of the amp will be driving a 2 ohm load.




Posted By: blackangel420
Date Posted: April 17, 2009 at 12:25 PM
dont u need to run both voice coils on the sub?

-------------
BlackAngel420




Posted By: haemphyst
Date Posted: April 17, 2009 at 2:36 PM
blackangel420 wrote:

dont u need to run both voice coils on the sub?

No.

-------------
It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."





Print Page | Close Window