so i had a customer come in yesterday with a dual xdvd8181 flipout screen. he asked if i could install the iplug auxiallry for him. so i pull in out to drill the hole in the pocket to run the rca. after everything was done put it back together turn it on and a code screen pops up. i try 1234, 0000 and then it lockes up. i pulld it back apart and and unplugged it. a couple minutes later put it back together get the code screen again. turns out customer bought car like that and has no idea what the code is. i called tech support but because we dont have a dealer account with dual they say they cant give us help. understandable. so is there anyone out theere that can
-------------
"...wear black silk underwear". That's a euphemism for "read the forum rules", right?
We can't give codes. It is in the rules. Seriously. It's not that we DON'T want to help you out, but:
the12volt.com forum rules wrote:
Any post containing any information that may be considered a violation of law or lead to an unlawful act in the United States of America such as injuring or killing someone or aiding in theft may be deleted and your membership may be suspended without notice. This includes bypassing head unit lockout codes, video bypass procedures, automatic transmission remote start units in manual transmission vehicles, etc.
-------------
It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."
No harm, no foul... however, you really SHOULD try a pair!
-------------
It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."