4 channel amp 1 solo baric

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=113301
Printed Date: May 15, 2025 at 11:24 AM

Topic: 4 channel amp 1 solo baric

Posted By: dwofford
Subject: 4 channel amp 1 solo baric
Date Posted: April 20, 2009 at 6:17 PM

this may be a stupid question but i cant seem to find the excact answer in need. I have a 4 channel sony amp 600w and i want to get a solobaric L5 or L7, Can i hook up rear outputs bridged to one coil and front outputs bridged to other coil. I will be splitting rca's from 2 to 4 i don't know the amp ohms but the sub says 2-4ohms.

Replies:

Posted By: i am an idiot
Date Posted: April 20, 2009 at 9:41 PM

If the speaker has dual 4 ohm coils, then yes you can bridge one coil to each pair of channels. Most sony amps wil feed both left and right channels from the Left RCA jack. Just to make sure, look for the (BTL) next to the white RCA jack.

Print Page | Close Window