Print Page | Close Window

subs for memphis belle 16 mc1300d

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=113429
Printed Date: July 13, 2025 at 9:31 AM


Topic: subs for memphis belle 16 mc1300d

Posted By: mcdavid000
Subject: subs for memphis belle 16 mc1300d
Date Posted: April 26, 2009 at 7:43 PM

I have 3 mtx 7500 tens single voice coil subs.4ohm        What is the best way to wire them to a Memphis belle 16-mc1300d. I believe it is 1ohm min. Will they handle it.



Replies:

Posted By: i am an idiot
Date Posted: April 27, 2009 at 7:19 AM

About the question of whether or not the speakers can handle the amp,  that depends solely on the quality of the data link between your ears and your right hand.   Meaning, I am sure you could blow the speakers any time you wanted to.  There is no substitute for having enough power.  Having more power than you need is always a good thing.  Your ability to control the extra power is very important.   Without a well trained ear it may not be a good idea.

Option 1 (parallel) = 1.34 ohm load
Speakers wired in parallel
Recommended Amplifier: Stable at 1 ohm mono
posted_image
 






Print Page | Close Window