stereo integrity mag d2 v4’s

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=113508
Printed Date: May 08, 2025 at 1:03 PM

Topic: stereo integrity mag d2 v4’s

Posted By: k.gren
Subject: stereo integrity mag d2 v4’s
Date Posted: April 30, 2009 at 9:18 AM

Hey guys I was just wondering if the new SI Mag D2 V4's are any good? I know the older models are good but haven't heard much about the new ones. I was going to buy a couple unless you have better suggestions.. Thanks!

-------------
~K.Gren~

Replies:

Posted By: aznboi3644
Date Posted: April 30, 2009 at 11:33 AM

These new ones are pure SQ subs designed for sealed enclosures only. If you want a high quality sound quality driver this is a very good choice.

If you like to run kilowatts of power and want high output these are not for you.

-------------
Custom Enclosure Design

Posted By: k.gren
Date Posted: May 04, 2009 at 8:56 AM

Well these are what I want then. Any suggestions on an amp or amps to power them?

-------------
~K.Gren~

Posted By: haemphyst
Date Posted: May 04, 2009 at 1:02 PM

The JL amps are really nice, but I'd go with an Alpine PDX.

Looking at the specs for the drivers, the 1.600 would be a fantastic choice, but I'm an "overkill is a good place to start" kind of guy... I'd go right to the 1.1000. Get those extra (almost) 3dB! posted_image

-------------
It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."

Print Page | Close Window