Print Page | Close Window

wiring prs d3000spl to w3001d4 sub?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=113635
Printed Date: May 29, 2024 at 5:40 AM


Topic: wiring prs d3000spl to w3001d4 sub?

Posted By: biggmann
Subject: wiring prs d3000spl to w3001d4 sub?
Date Posted: May 06, 2009 at 1:39 PM

I have 2 pioneer PRS-D3000SPL amps and 2 Pioneer TS-W3001D4 subs and I am looking for PROPER wiring instructions to get the most bass out of them, it seems to be lacking and im 100% positive they are wired wrong.

The amp:
# Competition SPL Digital Mono Amplifier with 2000 Watts Max. Power
# Peak Music Power 2000 Watts
# Load Impedance Capability: 2~8 Ohm
# Continuous Power (4 ohm): 500 Watts x 1
# Continuous Power (2 ohm): 1000 Watts x 1

The Subs:
# RMS Power Range : 1000 Watts
# Peak Power Handling: 3000 Watts
Dual 4-Layer, Long Voice Coil

What is the BEST way to hook these up? A diagram would be awesome.



Replies:

Posted By: DYohn
Date Posted: May 06, 2009 at 1:55 PM

Connect each sub to its own amp like this:

posted_image



-------------
Support the12volt.com


Print Page | Close Window