wiring my subs

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=113670
Printed Date: May 02, 2024 at 11:30 PM

Topic: wiring my subs

Posted By: chasepb
Subject: wiring my subs
Date Posted: May 07, 2009 at 8:36 PM

ok i got two 4 ohm subs and i neeb both of them to run off 1 channel at a 4 ohm load

thanks chase

Replies:

Posted By: i am an idiot
Date Posted: May 07, 2009 at 8:47 PM

Not going to happen. 8 Ohms will be your only option.

Option 2 (series) = 8 ohm load
Speakers wired in series
Recommended Amplifier: Stable at 4, 2, or 1 ohm mono

Posted By: chasepb
Date Posted: May 07, 2009 at 9:09 PM

so how much power will it have .. at 4 ohms it 700watts

Posted By: i am an idiot
Date Posted: May 07, 2009 at 9:24 PM

Theoretically 350 watts. But probably around 400 with that amp.

Posted By: chasepb
Date Posted: May 07, 2009 at 11:08 PM

my amp can run 2 ohm unabridged so could it run 2 ohms bridged

thanks chase

Posted By: i am an idiot
Date Posted: May 08, 2009 at 6:22 AM

Do you like the amp?

Print Page | Close Window