Print Page | Close Window

alpine speakers, 2001 honda prelude

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=114085
Printed Date: June 04, 2024 at 8:49 AM


Topic: alpine speakers, 2001 honda prelude

Posted By: jbtphan
Subject: alpine speakers, 2001 honda prelude
Date Posted: May 28, 2009 at 8:53 PM

I just purchased Alpines Type S speakers for my 2001 honda prelude and i know that i bought the correct size but when i took out one of the front speakers i noticed that the car came with an adapter but the speakers did not. If anyone knows what i am talking about could you please help.




Replies:

Posted By: soundnsecurity
Date Posted: May 28, 2009 at 8:57 PM
will they fit into the stock adapter? if so, use it. if not, then you can try to just screw them into the door directly or make an adapter out of some half inch wood.

-------------




Posted By: jbtphan
Date Posted: May 28, 2009 at 8:59 PM

Sorry for not being clear. but the speakers fit fine it is the wiring that has an adapter in the door but the speaker does not.





Posted By: soundnsecurity
Date Posted: May 28, 2009 at 9:17 PM
well you can buy speaker adapters for your car at a local shop or if you look at the terminals of the stock speaker there might + and - markings. find out which factory wire corresponds to which polarity and wire your new speakers the same way. I would solder and tape so i wouldnt have to cut the factory plug off but i guess you will be using butt connectors have at it

-------------




Posted By: soundnsecurity
Date Posted: May 28, 2009 at 9:18 PM
did your new speakers come with any wire at all?

-------------





Print Page | Close Window