Print Page | Close Window

hissing sound with new line out converter

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=114257
Printed Date: July 07, 2025 at 5:07 PM


Topic: hissing sound with new line out converter

Posted By: rob2222
Subject: hissing sound with new line out converter
Date Posted: June 05, 2009 at 3:03 PM

Hi,
I have a 2004 Toyota Camry XLE with the JBL premium sound system. I had an alpine headunit in it with component speakers and JL subs but I broke my headunit the other day so I put my stock toyota headunit back in with a line output converter after the factory amp to connect the front component speakers to my JL amp for the front speakers. You have to catch the speaker wires after the amp because the volume is controlled by the factory amp but there is a constant hissing sound that is unacceptable. I know this is a problem sometimes but iv'e never had this problem before so how exactly do I eliminate this hissing and static? Thanks a lot.



Replies:

Posted By: i am an idiot
Date Posted: June 05, 2009 at 3:31 PM
 
 

https://www.pac-audio.com/productDetails.aspx?Productid=780&CategoryID=28

The above Line Out Converter is designed to connect to the output of a Factory amplifier.  The reduction rate is greater in this unit. 





Print Page | Close Window