alpine cda 9856 issues

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=114814
Printed Date: April 19, 2024 at 11:23 AM

Topic: alpine cda 9856 issues

Posted By: PuppyDawg
Subject: alpine cda 9856 issues
Date Posted: July 02, 2009 at 11:50 AM

I just upgraded my alpine decks (from 7863 to a 9856) and had all the same wiring set up for both decks....the CDA-9856 (great deck) used it for a few days....and then all of a sudden (when you put the face in) it doesn't work anymore....when you flip the face down (as if you were going to place a cd in it) the actual led for the eject button blinks off and on as if some type of alarm for the unit was armed.....anybody have any suggestions on this?

-------------
*paw print*

Replies:

Posted By: DYohn
Date Posted: July 02, 2009 at 12:16 PM

First, try pressing the reset button (see your owner's manual.)

-------------
Support the12volt.com

Posted By: still_walkin
Date Posted: July 04, 2009 at 5:16 AM

Check your wiring .. sounds like your illumation wire is not connected or in the wrong place

-------------
1993 sdv
Alpine 4x6 6x9 5 1/4 swr-10d4
alpine v60
12.5 VGA flip down
Nettop pc w/10" touch screen
78nova
5-re audio 5x7 ,10" sub &
Xtx-500.5
"Take the faceplate off get the jumperpack"

Print Page | Close Window