factory amp pop
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=114887
Printed Date: May 21, 2024 at 11:54 AM
Topic: factory amp pop
Posted By: wadewills
Subject: factory amp pop
Date Posted: July 06, 2009 at 10:21 AM
Does anyone know if there is a way to stop a factory toyota amp on a 1995 camery from poping when the radio cuts on and off? I was thinking maybe a resistor or capasitor might do it but am unsure of the correct one to use and the ohm/farad to use? Many thanks for help. By the way im using the metra 70-8112 and a kenwood radio
-------------
Enjoy Life theres plenty of time to be dead
Replies:
Posted By: yimke
Date Posted: July 06, 2009 at 11:36 PM
Put a 4 channel noise filter in line and adjust your gain outputs. Quality one usually ranges from $40-$50.
Otherwise I would recommend a full amp bypass if you are going to be putting something bigger into it.
Posted By: i am an idiot
Date Posted: July 07, 2009 at 6:21 AM
If you disconnect the remote wire of the radio, while leaving the radio on, does it pop? Then if you reconnect the remote wire, when the radio is already powered up, does it pop?
-------------
Let's Go Brandon Brown. Congratulations on your first Xfinity Series Win. LGBFJB
Posted By: rtsv_dancro
Date Posted: July 08, 2009 at 11:13 PM
i've never had this issue with this particular car, but on a Lincoln Towncar, I had to use a 1.5k resistor, which killed the pop instantly. I guess that would be an inexpensive thing to try, but you'll probably end up doing what yimke said.
lemme know how it turns out
-------------
"It is impossible to defeat an ignorant man in argument."
- William Gibbs McAdoo
Posted By: yimke
Date Posted: July 10, 2009 at 9:33 AM
The 1.5k ohm resistor worked because ford amps have only a 5v turn on. Too much voltage and the amp pops the speakers.
Toyota's are another beast 
Posted By: wadewills
Date Posted: July 10, 2009 at 12:55 PM
Sry for the late reply back! The 1.5k resister did work. I really appreciate all the help yall gave me! Thanks guys
-------------
Enjoy Life theres plenty of time to be dead
Posted By: rtsv_dancro
Date Posted: July 10, 2009 at 4:35 PM
no problem bro. anytime!  ------------- "It is impossible to defeat an ignorant man in argument."
- William Gibbs McAdoo
|