how is this amp/sub combo?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=114996
Printed Date: July 15, 2025 at 10:30 AM

Topic: how is this amp/sub combo?

Posted By: nc6er
Subject: how is this amp/sub combo?
Date Posted: July 11, 2009 at 3:39 AM

Hi everyone I have two 12" memphis power reference subs. specs for the subs are: 4 ohm resistance, DVC, 250/500 watts RMS/peak.

My question though is would this kenwood ampbe a good match for these subs. If not could you guys please suggest a good amp in the same price range as the kenwood. Any input would be greatly appreciated.

Replies:

Posted By: nc6er
Date Posted: July 11, 2009 at 3:40 AM

also I forgot to mention that my vehicle is a 2007 pontiac g6

Posted By: DYohn
Date Posted: July 11, 2009 at 9:00 AM

Sure. Wire for a 4-ohm load.

-------------
Support the12volt.com

Posted By: georgerocco
Date Posted: July 11, 2009 at 12:55 PM

I;ve been running the Memphis PR 12's on a Memphis MCD1000 for three years, never had a hiccup. As long as you properly tune the amp, you should be able to run it at two ohms. What kind of head unit are you using?

-------------

Print Page | Close Window