amp load

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=115015
Printed Date: May 20, 2024 at 10:13 AM

Topic: amp load

Posted By: rb1970
Subject: amp load
Date Posted: July 12, 2009 at 1:48 PM

2/4ohm dvc subs wired parallel into 2 channels, whats the load on the amp?

-------------
Rodney Brendle

Replies:

Posted By: richardparker
Date Posted: July 12, 2009 at 2:04 PM

Are you going to run 1 sub from each channel?If you are...It will be 2ohms each channel.If bridging it with both subs running ..It with be 1 ohm. I dont know too many 2channels bridged that can do 1ohm

Posted By: i am an idiot
Date Posted: July 12, 2009 at 2:05 PM

If you have (2) 4 ohm dvc subs, and you parallel the coilsof one woofer and connect that woofer to one channel of the amp, and do the same for the other speaker and other channel. This would be considered a 2 Ohm stereo Load.

Posted By: rb1970
Date Posted: July 13, 2009 at 3:33 PM

thanks,you answered my question.

-------------
Rodney Brendle

Print Page | Close Window