regarding wooferurgent

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=115154
Printed Date: May 14, 2025 at 8:07 PM

Topic: regarding wooferurgent

Posted By: absami
Subject: regarding wooferurgent
Date Posted: July 18, 2009 at 4:01 AM

guys i have bought this amp

https://www.fusionpakistan.com/Product-Detail.php?Catid=2&SeriesId=2&Productid=23

now should i buy SWR-1242D or SWR-1222D ...please check the specs and recommend....i am not very technical...

Replies:

Posted By: i_want_the_boom
Date Posted: July 18, 2009 at 7:46 AM

Get the SWR-1242D those are dual 4ohm drivers you can run at 2ohms which the amp will handle if you get the others which are dual 2 ohm you can wire in series to a 4 ohm load but wont get as many watts as you would if you get the 4 ohm speakers and wire them parallel. 550 Watts RMS x 1 Channel @ 4 Ohms and 1% THD+N, 850 Watts RMS x 1 Channel @ 2 Ohms and 1% THD+N

-------------
If the trunk dont rattle then its not loud.
If it's to loud then you're to old.

Posted By: absami
Date Posted: July 18, 2009 at 8:56 AM

and will dual 2 ohm or dual 4 ohm work better with this and will dual 2 ohm or dual 4 ohm work better with this https://www.fusionpakistan.com/Product-Detail.php?Catid=2&SeriesId=2&Productid=28

Posted By: i_want_the_boom
Date Posted: July 18, 2009 at 9:10 AM

If you are looking for a amp to run your subs you should get either a 2 channel or a mono class d amp. I would go with the mono class d amp just my opinion. the second amp you listed is a four channel amp. it's bridgeable but only into 4 ohms so i wouldnt get that amp. not for either of those subs.

-------------
If the trunk dont rattle then its not loud.
If it's to loud then you're to old.

Posted By: stevdart
Date Posted: July 18, 2009 at 9:14 PM

"Wooferurgent" - new, from the makers of Volfenhag and Audiobahn. Still "German" engineering, still awe inspiring.

-------------
Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.

Posted By: i am an idiot
Date Posted: July 18, 2009 at 9:26 PM

Steve, that was exactly what I thought when I saw it.

-------------
Let's Go Brandon Brown. Congratulations on your first Xfinity Series Win. LGBFJB

Posted By: whiterob
Date Posted: July 19, 2009 at 1:43 AM

absami wrote:

guys i have bought this amp

https://www.fusionpakistan.com/Product-Detail.php?Catid=2&SeriesId=2&Productid=23

now should i buy SWR-1242D or SWR-1222D ...please check the specs and recommend....i am not very technical...

If you are getting that amp get the SWR-1222D. With that version you can wire to a 2 ohm load. Use the diagram below...

posted_image