macrom 4405

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=115339
Printed Date: May 12, 2025 at 5:52 PM

Topic: macrom 4405

Posted By: jus learnin
Subject: macrom 4405
Date Posted: July 28, 2009 at 7:35 PM

I have a sony 10 inch sub,jbl 6x9's ,an old two channel pioneer cd and a macrom 4405.the amp is playable as a 3 way setup.it has hi and lo filters with separate gains.how would it sound the best? using hi and lo or using either high or low?

awesome site i used the sub woofer building calculator to match the sony sub specs so i could build the sub to fit the bow of my ski boat thanks12 volt

Replies:

Posted By: i am an idiot
Date Posted: July 28, 2009 at 7:42 PM

Input switch set to 2 Channel. Output switch set to 3 Channel. Both crossovers set to on. Both Crossover Cutting Points set to around 100Hz to start with.

https://www.macrom.it/docs/Manual-4405-4407.pdf

-------------
Let's Go Brandon Brown. Congratulations on your first Xfinity Series Win. LGBFJB

Print Page | Close Window