Print Page | Close Window

rf p2s ported or sealed?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=115398
Printed Date: May 15, 2024 at 6:50 AM


Topic: rf p2s ported or sealed?

Posted By: fullnelson
Subject: rf p2s ported or sealed?
Date Posted: July 31, 2009 at 8:49 PM

2 12" RF P2's

1 500.2 RF amp. 737 watts RMS @ 4 ohms.

What would be the best box to go to? Im not looking for all out SPL. If anything, more a 60/40 SQ/SPL miz, if ya know what I mean.

I have been playing around in Winisd and I can gte the ported box to handle more power and Its curve throughout the 30-80hz range is within 3.3Db. Will this give a good a flat enough curve? Or should it be flatter? Its a 4ft^3 tuned to 24hz w/ a 120hz lowpass filter.

How accurate is the Winisd when it comes to how these boxes behave?

Car Is an 87 Supra hatchback, So space is limited to about 4ft^3.




Replies:

Posted By: laynlower
Date Posted: August 01, 2009 at 11:01 AM
ported

-------------
live to scrape
scrape to live
LOWLIFE CUSTOMS


Print Page | Close Window