rf t1500 1bd amp
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=115482
Printed Date: May 17, 2024 at 3:18 PM
Topic: rf t1500 1bd amp
Posted By: livinloud247
Subject: rf t1500 1bd amp
Date Posted: August 05, 2009 at 2:51 PM
Will the RF T1500-1BD amp blow 2 12" RF T1's at 1-ohm? The guy said he has the 2 subs (2 4-ohm DVCs) wired to 2-ohms with this amp? I didn't think that was possible for one, and two, I'm afraid the power would blow these speakers. Sending 750 RMS a piece when they are only rated at 600?
Replies:
Posted By: i am an idiot
Date Posted: August 05, 2009 at 6:47 PM
He probably paralleled the coils on each speaker and connected each speaker to the amp individually. In his mind he had it wired 2 ohms per channel. In the real world, the amp is a 1 channel amp. So he had it wired 1 ohm. The only way to achieve a 2 Ohm load at the amp would be to use only one voice coil per woofer.
------------- Let's Go Brandon Brown. Congratulations on your first Xfinity Series Win. LGBFJB
|