tapping factory receiver

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=115614
Printed Date: May 02, 2024 at 11:16 PM

Topic: tapping factory receiver

Posted By: cbadizzle
Subject: tapping factory receiver
Date Posted: August 12, 2009 at 2:29 AM

I'm trying to install my C-10 Kicker in my 1998 Durango. I recently installed new speakers (Alpine SD's) to the factory receiver (I just stripped the wires and connected the new speakers to the factory wiring). Now, to save myself a pretty penny and not having the subwoofer installed or buying a new receiver and wiring the entire truck, I would like to try and install it myself through the factory receiver. First question, is it even possible? Second question, if so, which wire do I need to tap into on the receiver's wiring harness?

Any input would be appreciated.

Thanks.

Replies:

Posted By: ruki101
Date Posted: August 12, 2009 at 6:49 PM

Yes, it's possible. Use the "search" for the wiring.
Goodluck bud!

-------------
Just About Anything Sparks

Posted By: i am an idiot
Date Posted: August 12, 2009 at 6:52 PM

Left Rear (+)	White
Left Rear (-)	Dark Blue/Red
Right Rear (+)	BROWN / White
Right Rear (-)	BROWN / Orange

-------------
Let's Go Brandon Brown. Congratulations on your first Xfinity Series Win. LGBFJB

Posted By: cbadizzle
Date Posted: August 13, 2009 at 1:43 PM

Thank you guys very much!