Print Page | Close Window

jvc amp ks ar7004

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=115807
Printed Date: July 07, 2025 at 7:48 PM


Topic: jvc amp ks ar7004

Posted By: absavino
Subject: jvc amp ks ar7004
Date Posted: August 21, 2009 at 9:15 AM

Hi,

I just bought this amp and I only want to hook up two 100 watts RMS speakers to it. In reading the installation manual (see page 2 of link below), it only mentions the two speaker setup in terms of bridging which will send 200W RMS to the speakers. My question is that shouldn't I be able to just use the four speaker setup with just two speakers? It kind of confused me that it did not mention this setup and makes it seem that all channels must be used either with speakers or by being bridged.
https://akamaipix.crutchfield.com/Manuals/105/105SAR7004.PDF

Thank you.   




Replies:

Posted By: i am an idiot
Date Posted: August 21, 2009 at 5:24 PM

If you wish, you can use only 2 of the 4 channels.  They just don't show that as an option because they figure you were not going to pay the extra money for a 4 channel amp and use only 2 of them.



-------------
Let's Go Brandon Brown. Congratulations on your first Xfinity Series Win. LGBFJB


Print Page | Close Window