Enclosure for 2 JL Audio 13w7s
Printed From: the12volt.comForum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=116128
Printed Date: April 28, 2024 at 9:47 AM
Topic: Enclosure for 2 JL Audio 13w7s
Posted By: samuelsteven
Subject: Enclosure for 2 JL Audio 13w7s
Date Posted: September 06, 2009 at 4:47 AM
Im hoping to start my build tomorrow, but before I do, Id like to get as much input as possible.I really wanted a better looking design, but this was is easiest and I was just gonna take my router and a half circle bit and Round the edges and carpet it. But JL recommends the box ported to 30hz, and I think Ive done that. If anybody thinks a different design is better, please let me know. The subs will be powered by a Kicker KX2500.1 wired at 1.5ohms. The amps specs say 2 ohm stable, but alot of people that own it say it does fine at 1ohm and it made it more popular then the ZX, so I figure 1.5ohms should be ok. The car is a 1998 cadillac sts.
Here is what I have and heres the direct link in case its not very clear. https://i64.photobucket.com/albums/h165/samuelsteven/speakerbox.png
Here are the specs
https://mobile.jlaudio.com/products_subs.php?series_id=10
Here is what I have and heres the direct link in case its not very clear. https://i64.photobucket.com/albums/h165/samuelsteven/speakerbox.png
Here are the specs
https://mobile.jlaudio.com/products_subs.php?series_id=10