setting gains
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=116324
Printed Date: May 03, 2024 at 10:54 PM
Topic: setting gains
Posted By: spmpdr
Subject: setting gains
Date Posted: September 14, 2009 at 11:39 PM
I am getting a new h/u a kenwood kdx 993 exceleon ,I have read the how to set your gains properly and did it with my old h/u.My question is do i set all of the features the h/u has before i set the gains?, such as cabin area,speaker distance, etc.This h/u has a ton of sq features and i really want to get the best sound i can.I know you keep the basics flat and such.
-------------
-A vision without a plan is just a hallucination-
Replies:
Posted By: DYohn
Date Posted: September 15, 2009 at 9:52 AM
Turn off all processing when setting gain. ------------- Support the12volt.com
Posted By: spmpdr
Date Posted: September 15, 2009 at 8:27 PM
After i am done setting gains should i set the features to maximize sq or not ?
-------------
-A vision without a plan is just a hallucination-
|