constant power lead for pioneer hd tuner

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=116536
Printed Date: May 05, 2024 at 9:10 PM

Topic: constant power lead for pioneer hd tuner

Posted By: razer
Subject: constant power lead for pioneer hd tuner
Date Posted: September 25, 2009 at 11:18 AM

This is for a 08 Honda CR-V EX.
I installed an Avic z110 and I am adding the PIONEER GEX-P20HD - HD TUNER. I need to find a constant power lead in the driver's kick panel.
I may be a yellow wire.
Any ideas where I may find this wire?

Thanks,
r.

Replies:

Posted By: i am an idiot
Date Posted: September 25, 2009 at 7:16 PM

The Yellow wire of the Z110 is a constant 12 volts. I have no idea where the wire is in the drivers kick panel. But it is in the radio harness and your radio is connected to it.

Posted By: haemphyst
Date Posted: September 25, 2009 at 8:00 PM

A constant power lead is the same, anyplace in the car. If you've already connected the radio, tap the yellow wire behind it, and run it to the satellite module. Easy-peasy, lemon squeezy. Don't make it harder on yourself than you have to! :)

-------------
It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."

Posted By: razer
Date Posted: September 25, 2009 at 11:23 PM

There is an inline fuse on the power lead of the HD tuner.
I wanted to keep it in the kick panel so I could easily get to it.

Posted By: 98neonr/t
Date Posted: September 30, 2009 at 9:50 AM

there should be a vehicle wireing color guide on this site just look up the alarm wire colors and tap it in the ignition harness that should be close enough to the dkp and if i remember that tuner box has like 6 foot of power wire on it

Print Page | Close Window