Print Page | Close Window

amps power

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=116570
Printed Date: June 08, 2024 at 9:15 PM


Topic: amps power

Posted By: minivauxhall
Subject: amps power
Date Posted: September 27, 2009 at 4:05 PM

hi there i have a Mac Audio puslar2 amp tech data is 2x75w / 1x250w rms on 4 ohms  or   2x100w rms on 2 ohms but does not say anything about bridged in 2 ohm load is that because it cant, loudspeaker impedance (stereo mode) is 2-8ohms   many thanks  Junior



Replies:

Posted By: i am an idiot
Date Posted: September 27, 2009 at 4:16 PM
If the minimum stereo load is 2 ohms, the minimum bridged load will be 4 ohms.


Print Page | Close Window