plexy
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=116585
Printed Date: May 15, 2024 at 12:28 PM
Topic: plexy
Posted By: dp85iroc
Subject: plexy
Date Posted: September 28, 2009 at 10:28 AM
so if i wanted to put a plexy glass window on the back of an enclosure to show off the subs what size plexy can you use? like thickness and the length x width sizes
-------------
hmmm...thinking is always good...but question are better
Replies:
Posted By: d_rock_81
Date Posted: September 28, 2009 at 11:44 AM
Thick enough not to flex under the pressure of the subs if its going to be incorporated as part of the box.
-------------
Dustin Rockney
Rockstar Autosports
Posted By: whiterob
Date Posted: September 28, 2009 at 2:51 PM
I would use at least 3/4". You don't want to use too large of a piece or the plexiglass will flex. As long as the piece is not very large it would be fine with 3/4".
3/4" plexi is really expensive so you won't want to make the window too large anyways.
|