kicker solo baric s15l7

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=116632
Printed Date: May 09, 2025 at 1:49 PM

Topic: kicker solo baric s15l7

Posted By: pitola
Subject: kicker solo baric s15l7
Date Posted: September 30, 2009 at 1:30 PM

i have 2 s15L7 in a ported box and i have a hifonics bxi 1610d 1600 watt amp class d. the amp is a 2 channel. what i need to know is what do you guys think would be the best way to wire the speakers so i can break my windows. i dont know nothing about ohms or anything like that so please help. the guys at work have 2 s12l7 with a smaller amp and it hits harder than mines. i went to the kicker site and printed the wiring diagram but all it says is that ohm stuff i dont understand. i tried searching but everybody on here speaks the ohm language. if anyone can explain a little better please help.

almost forgot i have a epicenter also if that helps.

Replies:

Posted By: pitola
Date Posted: September 30, 2009 at 1:44 PM

also forgot

the box has 2 separate connections. 1 for each speaker.

Posted By: icearrow6
Date Posted: September 30, 2009 at 4:40 PM

First off. the ohms thing.
The OHMs is the "resistance" of the coils of the woofers. Do u still have boxes the L7 came in? it should be printed on the box on a sticker with the barcode. Otherwise take the woofers out and look at where the speaker terminals are: it will say coil 1 and a number either 4 or 2 with a horseshoe looking symbol.
The horseshoe symbol means OHMs.
anyways, if the woofers are 4ohms.
posted_image

If they are 2ohm
https://www.the12volt.com/12voltimages/2_2ohm_dvc_2ohm.gif

hope this helps

-------------

Posted By: aznboi3644
Date Posted: September 30, 2009 at 5:05 PM

you will never break your windows from bass with those subs

-------------
Custom Enclosure Design