box for 6x9’s, 1993 suzuki alto

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=116657
Printed Date: May 12, 2025 at 5:08 AM

Topic: box for 6x9’s, 1993 suzuki alto

Posted By: themaster
Subject: box for 6x9’s, 1993 suzuki alto
Date Posted: October 02, 2009 at 1:46 AM

Hi to all,
I am new here. I wanna put a question is front of the experts of this forum. My question is that I have two speakers of 6 by 9 inches, 70 watts RMS. I wanna install them in my hatch back car Suzuki alto 1993, in a single box because of little space. Please tell me the size of box which produce deep bass. Please guide me can i use sealed one or with flared port. I forget to tell you guys that i already have a kenwood power amplifier which produces 50 watts RMS at 4 ohms.

Thanks advance

regards

The master

-------------
TMS

Replies:

Posted By: KPierson
Date Posted: October 02, 2009 at 5:37 AM

Your best bet would be to contact the manufacturer of the speaker, as all speakers are designed differently.

-------------
Kevin Pierson

Posted By: tommy...
Date Posted: October 02, 2009 at 8:22 AM

Do these "mysterious" speakers have a name...What kind of deep bass are you expecting here...? Is this more for mid-range bass...? Do you currently have a sub...? Maybe go with something diiferent for "bass"...?

-------------
M.E.C.P & First-Class
Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!

Posted By: blackcivichatch
Date Posted: October 02, 2009 at 8:40 AM

Although i Have heard somewhat impressive bass from 6x9s, I Too would suggest using something different for bass.. But if you already have the the 6x9s, and determined to use them, you could build a ported box to put em in and maybe get some ok Bass output

-------------
UNLABELED Custom Car Club President

Posted By: themaster
Date Posted: October 02, 2009 at 10:13 PM

These speakers are Kenwood HQ 718. They are actually 7 by 10 inches and 80 watts RMS at 4 ohms. Please tell me the box size for them. Is it sealed or flared ported? Please remember I hav little space because I hav hatch back car, with natural gas cylinder as an alternate fuel in it.

-------------
TMS

Posted By: tommy...
Date Posted: October 03, 2009 at 9:13 AM

https://www.kenwoodusa.com/Support/Car_Entertainment_Owners_Manuals/ ...?

-------------
M.E.C.P & First-Class
Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!