2 12 l7 4ohm amp

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=116687
Printed Date: May 10, 2025 at 9:35 AM

Topic: 2 12 l7 4ohm amp

Posted By: fatal192000
Subject: 2 12 l7 4ohm amp
Date Posted: October 03, 2009 at 2:54 PM

I have two 12 that i had installed at a shop with a 1500.1 kicker amp but from what i read online i was supposed to get 2ohm l7. I told them when i ordered them and i just checked the box and they were the 4ohm. What is the best way to set these subs at as far as wiring ohms to get the most out of the 1500.1 thanks in advance

-------------
TEXAS

Replies:

Posted By: i am an idiot
Date Posted: October 03, 2009 at 5:18 PM

Option 2 (series/parallel) = 4 ohm load
Voice coils wired in series, speakers wired in parallel
Recommended Amplifier: Stable at 4, 2, or 1 ohm mono

Posted By: fatal192000
Date Posted: October 06, 2009 at 1:21 PM

but should i take the car back n have them trade the speakers out beacuse from what i understand im not using the full capablity of the ampi did ask for 2ohm version.

-------------
TEXAS

Print Page | Close Window