infinity 6000 cs
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=116744
Printed Date: September 17, 2025 at 12:03 PM
Topic: infinity 6000 cs
Posted By: evileye
Subject: infinity 6000 cs
Date Posted: October 05, 2009 at 8:56 PM
The crossovers for the speakers on the subject title are shot. Anybody know where I can get some cross overs for them? Thanks ahead of time.
Replies:
Posted By: i am an idiot
Date Posted: October 05, 2009 at 9:05 PM
Define shot. It is normal for some components to run hot and get discolored. Most common reason for them to quit working are bad solder joints on those components that run hot. Have you taken them apart and looked for bad solder joints?
Posted By: evileye
Date Posted: October 06, 2009 at 1:24 AM
well the speaker wire that runs to the screws that holds them on are all rusted. So my speakers will go off and on. I had the window motors replaced and the clowns that did it removed the water barrier. So hence the nasty rusted bolts sadly on the crossovers.
|