eclipse ti 10

Does anyone have the T/S parameters for one of these? Or, if you know what the recommended box size is, that would be great also.  Tried to PM Haemphyst since mine is the same as his,  but his inbox is full.

My sealed enclosure ends up with just a bit north of .95 ft^3 net, and I stuffed that with about .5 to .6 pounds of Dacron pillow stuffing.

I'm sorry I can't help with a vented enclosure, and as far as T/S parameters, I'm only re-building a previous enclosure I had, (this is my second Ti 10") so I don't have them... I do remember that I ended up with a Q of right about .6 before, so you might go bigger with yours. I was looking for some extension, while maintaining excellent transient response.

Most people will think a Q of .6 will sound a bit thin, but this being an SQ woofer, I decided to use an enclosure to show that off.

-------------
It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."

Cool, thanks for the info!  I may do one just a hair over 1 cu. ft.  Do you have any idea what the displacement of this thing is or did your number include displacement?

No idea what the displacement is. My numbers were net volume. It's smaller after the addition of the woofer. That's why I stuffed the enclosure. IIRC, it's about .19 or thereabouts.

-------------
It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."

Ok.  Thank you!