Another Cap question
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=11685
Printed Date: May 23, 2024 at 5:23 AM
Topic: Another Cap question
Posted By: Trent109
Subject: Another Cap question
Date Posted: March 31, 2003 at 5:13 PM
OK, what im wanting to do, is sent the power wire threw a digital distribution block, and then have one power wire go to the amp, and the other go to the CAP, is this possible, or do i have to run the cap before the distribution block?
Trent
Replies:
Posted By: bberman1
Date Posted: March 31, 2003 at 5:51 PM
You can do it before of after the block doesn’t really matter just keep the cap within 18" of the amp.
Posted By: x6369x
Date Posted: March 31, 2003 at 6:29 PM
Assuming you're running multiple amps, if you put it before the distribution block, the cap power will be disbursed to all the amps.
I would put the cap after the distribution block, and before the bass amp. Caps charge a lot faster than regular car batteries, therefore relieving stress to the system during hard hitting bass notes.
Basiscally what you need to have is a short piece of wire from the distribution block to the cap, and another short piece of wire from the cap to the bass amp.
Hope this helps.
-------------
Friends Don't Let Friends Bump Stock.
Posted By: Trent109
Date Posted: March 31, 2003 at 7:30 PM
your damn right it helped, thanks alot man!
|