kicker cvr wiring

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=116994
Printed Date: May 10, 2025 at 12:16 AM

Topic: kicker cvr wiring

Posted By: pcana11
Subject: kicker cvr wiring
Date Posted: October 15, 2009 at 7:35 PM

Ok, so i just got a cvr 12. i was wondering what the best way to wire it would be. i have an alpine mrp-m500 watt amp. its going in a ported box with ~1.75 cubic feet. with pollyfill also. any help would be appreciated. thank you, Patrick. and a diagram

-------------

Replies:

Posted By: casey707
Date Posted: October 20, 2009 at 10:05 AM

is this a 2 or 4 ohm DVC sub?

-------------
Casey S.

Posted By: pcana11
Date Posted: October 20, 2009 at 7:10 PM

its a 4 ohm

-------------

Posted By: i am an idiot
Date Posted: October 20, 2009 at 8:28 PM

Assuming your amp will run at 2 Ohms, the following will be a 2 ohm load. If your amp is not capable of a 2 ohm load, let us know and we will give you a new diagram.

Option 1 (parallel) = 2 ohm load
Voice coils wired in parallel
Recommended Amplifier: Stable at 2 or 1 ohm mono

Posted By: pcana11
Date Posted: October 21, 2009 at 8:06 PM

alright, thank you. any help on box size and port size

-------------

Print Page | Close Window