bridging module

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=117077
Printed Date: May 10, 2025 at 3:11 PM

Topic: bridging module

Posted By: jlaudiofreak
Subject: bridging module
Date Posted: October 19, 2009 at 12:51 AM

I have a memphis belle and I can not find a bridging module for it. Does anyone know where I can find one or is they away I can make my own

Replies:

Posted By: jlaudiofreak
Date Posted: October 19, 2009 at 12:53 AM

1999 F250 SD, Alpine cva 1005, Alpine dvd, MB quart comp up front , jlaudio 6" in rear doors, and 3 jlaudio 12w6. Memphis belle amp

Posted By: i am an idiot
Date Posted: October 19, 2009 at 3:53 AM

I was not aware that either of the models of that amp required a module. I thought that they were all 5 channel amplifiers. I am not familiar with the earliest model, do you have a 5 or maybe a 6 channel amp?

Posted By: jlaudiofreak
Date Posted: October 20, 2009 at 7:00 PM

I have the 5 channel , memphis says I need a 16-bridging module. I can not find one anywhere

Posted By: i am an idiot
Date Posted: October 20, 2009 at 7:56 PM

That amp has a single subwoofer channel. There is nothing to bridge.

Posted By: haemphyst
Date Posted: October 20, 2009 at 8:02 PM

...and if you want to bridge the highs channels, they are already internally bridged.

The "16" thingie that you are looking for is the remote bass knob, not a bridging module. Check SonicElectronix. Even though they say it is out of stock, check with them anyway.

posted_image

Use the left negative for the negative speaker lead, and the right positive for the positive speaker lead - there is no module necessary. The fifth channel is a mono, there is nothing to bridge.

-------------
It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."

Posted By: i am an idiot
Date Posted: October 20, 2009 at 8:35 PM